4. Revive Weak Batteries Temporarily
Running low on battery power? Try this trick:
Instructions:
Remove the batteries and rub their ends with aluminum foil.
Warm them in your hands briefly to stimulate the chemicals.
Reinsert and test again.
Note: This is a short-term hack, not a permanent solution.
5. Clean the Inside of the Remote
If buttons are sticky or unresponsive, dirt may be the issue.
Cleaning process:
Carefully open the remote using a small tool.
Remove debris or dust near contacts.
Mix demineralized water and vinegar, then clean circuit boards with a cotton swab.
Let it fully dry before reassembling.
Optional: Use compressed air to clean without opening the case.
6. Inspect Internal Components
If all else fails, it might be a hardware issue.
Steps:
Open the remote and examine the circuit board.
Look for loose parts or broken solder joints.
Gently secure anything that appears out of place.
Final Option: Try using your TV’s control buttons, a mobile app, or a universal remote.
Final Thoughts: Simple Fixes, Big Savings
Before replacing your remote, try these cost-free solutions:
Refresh the batteries and clean the connectors.
Test the IR signal.
Try creative troubleshooting methods.
Remove internal debris and inspect electronics.
In many cases, you’ll have your remote working again in no time and save yourself the cost of a replacement.
4 devices if not removed from the power outlet
Typically, there are devices that a lot of families never unplug from the power outlet to cut off the power supply. Many people thinks that this is very normal and if we do not use the device but keep it plugged in, it will not waste electricity. This point of view is completely wrong!
According to the experience shared by long-time electricians, one of the common causes of wasting electricity is not unplugging electrical appliances when not in use. The electrician warns that the 4 devices below are the ones that everyone should consider immediately to save electricity effectively!
1. The TV
The more modern the smart TV is, the more electricity it can consume to maintain the network connection. So unplugging the TV when not in use is an economical and energy-saving way.
