There’s a hidden switch on the washing machine; simply turn it on, and dirty water will drain immediately. (Page 2 ) | April 25, 2025
Annonce:
Advertisement:
- Locate the Hidden Switch:
- Refer to your washing machine’s manual to find the hidden switch. It is usually located near the bottom or back of the machine.
- Turn on the Hidden Switch:
- Activate the switch to drain any dirty water from the machine. This helps remove accumulated dirt and bacteria.
- Clean the Drum:
- Pour 2 cups of white vinegar into the drum.
- Run a hot water cycle to help disinfect and remove any odors.
- Clean the Detergent Drawer:
- Remove the detergent drawer and soak it in warm, soapy water.
- Use an old toothbrush to scrub away any residue.
- Wipe Down the Exterior:
- Use a microfiber cloth dampened with vinegar or a mild cleaner to wipe down the exterior of the machine.
- Clean the Rubber Seal:
- Check the rubber seal around the door for any trapped dirt or mold.
- Wipe it down with a cloth soaked in vinegar.
- Run a Baking Soda Cycle:
- Add 1 cup of baking soda to the drum.
- Run another hot water cycle to further clean and deodorize the machine.
- Final Rinse:
- Run a final rinse cycle with just water to ensure all cleaning agents are removed.
- Leave the Door Open:
- After cleaning, leave the washing machine door open to allow it to air dry and prevent mold growth.
