The natural trick to eliminate mold from the house: it disappears in 1 hour without chemicals!! | March 22, 2025

Moisture build-up, poor ventilation, infiltration problems… Many factors can lead to the appearance of mold on walls. They make them ugly, but they also cause dangerous health problems. Then, it is necessary to eliminate them and for this we offer you an ecological and economical tip to defeat these microscopic fungi.
A deep cleaning of your home cannot be complete without fighting mold and preventing its appearance. Here is a natural remedy to get rid of it.

How to Fight Mold in Your Home? The Natural Remedy with Two Ingredients
It is true that there are many makeup removers available on the market that work very well, but many of them contain chemicals and toxic substances. Opt for green cleaning and only use natural ingredients that you probably already have at home.

White Vinegar and Baking Soda to Remove Mold Stains
Since white vinegar contains acetic acid, which gives it its descaling, stain removing and disinfecting properties, and baking soda absorbs moisture, which allows mold to grow, the combination of these two ingredients helps solve this problem very effectively.

What you’ll need:
200 grams of baking powder
10cl of water
15cl of concentrated white vinegar at 14 degrees
Here’s how to do it:
The first step is to prepare a kind of paste by mixing baking soda with a little water and pouring the vinegar into a spray bottle.
Then apply the baking paste directly to the areas affected by mold marks (walls, ceilings, joints, etc.).

Leave for 1 hour before spraying the white vinegar over the entire surface to be treated. This creates a chemical reaction in the form of foam, which makes it easier to remove and eliminate traces of mold.
Leave for about ten minutes before scrubbing the stains with a sponge.

Rinse with tap water or vinegar diluted with water.
Baking powder and vinegar

Other Remedies for Mold Stains
Like vinegar and baking soda, there are other very effective methods for removing mold stains.

– Hydrogen peroxide to treat mold

In a spray bottle, add a 3% concentration of hydrogen peroxide, then spray the areas to be treated and let it sit for ten minutes. Then scrub with a brush to remove the mold stains, then wipe with a damp cloth. If the mold stains do not disappear, repeat the process.

This antibacterial, antiviral, and antifungal solution, found in most medicine cabinets, can effectively treat mold. In fact, hydrogen peroxide can be safely applied to a variety of surfaces, including kitchen countertops, bathrooms, and bathtubs.